The difference between aviation aluminum alloy and ordinary aluminum alloy
Aerospace aluminum is an ultra-high-strength deformed aluminum alloy that is currently widely used in the aerospace industry. It has good mechanical and processing properties, good plasticity after solution treatment, good heat treatment strengthening effect, generally high strength below 150 ° C (or even higher), good toughness, is an ideal structural material.


Compared with ordinary aluminum alloys, aluminum alloys for aircraft have higher requirements on strength, hardness, toughness, fatigue resistance and plasticity. Due to the light weight and light weight effect of aviation aluminum, it has replaced steel and occupied the dominant position of current aviation materials. Aviation equipment has higher requirements for aluminum and is an important high-end application market for aluminum.


There are many kinds of aluminum alloys used on airplanes. The aluminum alloys used in aviation aircraft structures in the world today are mainly high-strength 2 series (2024, 2017, 2A12, etc.) and ultra-high-strength 7 series (7075, 7475, 7050, 7A04, etc.), and some 5 series (5A06) , 5052, 5086, etc.) and 6 series (6061, 6082, etc.) and a small amount of other series of aluminum.


Aerospace aluminum is mainly used in airfoil skins, airfoil long rafts, spar upper and lower edge strips, webs, fuselage long rafts, seat rails, keel beams, side frames, fuselage skins, lower fuselage Wall panels, main floor rafters and other parts.


1. Hard aluminum: aluminum magnesium copper alloy. The most widely used aluminum alloy in the aviation industry. Commonly used 2024, 2A12, 2017A, strength, toughness, fatigue resistance, good plasticity. Used to make skins, partitions, ribs, etc.


2, super hard aluminum: aluminum zinc magnesium copper alloy. Commonly used 7075, 7A09, high strength limit and high yield strength, with a large load, used to make the upper wing skin and girders on the wing.


3, anti-rust aluminum alloy: commonly used aluminum-magnesium alloy 5A02, 5A06, 5B05. It has high corrosion resistance, fatigue resistance, good plasticity and weldability. Used to make mailboxes, tubing, etc.


4, forged aluminum alloy, commonly used 6A02, high hardness, with good corrosion resistance. Manufacture of engine parts, joints, etc.


5, casting aluminum alloy, small specific gravity, high corrosion resistance, heat resistance, manufacturing engine casings and so on.

专栏:Industry information
作者: 佚名
原文链接: 阅读原文
上一页:Effect of other impurity components of aluminum alloy on surface treatment of aluminum profiles
下一页:Research progress of laser 3D printing technology for high strength aluminum alloy